Handboard is a verification process that must be carried out before mass production of products, or if the quantity and performance of the products are not so high and the industrial products can be produced in small batch, what methods can be used for processing small batch of plastic handboards? Now Jinan handmade small edition for you to analyze.

　　小批量塑膠手板加工可以采用哪些方法

　　What methods can be used to process small batch of plastic handboards

　　一、硅膠復模小批量生產

　　1、 Small batch production of silica gel replica

　　硅膠復模小批量生產的工藝流程就是先用3D打印一個產品模型作為模種，然后利用這個模種，周圍填充硅膠，做成一個硅膠模具，模具干了后，拿出模種，就變成了一個硅膠模具，往模具里面填充相應的塑膠材料，就可以小批量生產塑膠手板了。

　　The technological process of small batch production of silica gel mold is to print a product model in 3D as a mold type, and then use this mold type to fill silica gel around to make a silica gel mold. When the mold is dry, take out the mold type, and it becomes a silica gel mold. Fill the mold with corresponding plastic materials, and then small batch production of plastic handboards can be achieved.

　　硅膠復模小批量生產的產品材料比較多，一般常見的是ABS，pla，pc，軟膠等材料，對于一些結構相對簡單的產品來說，硅膠復模生產，還是不錯的選擇。

　　There are a lot of materials in small batch production of silica gel replica. Generally, ABS, PLA, PC, soft rubber and other materials are common. For some products with relatively simple structure, silica gel replica production is a good choice.
               

　　二、3D打印尼龍小批量生產

　　2、 Small batch production of 3D printing nylon

　　3D打印是新出現的加工工藝，由于3D打印尼龍材料具有良好的物理機械性能，適合做功能性手板和部分行業的終端產品，特別是一些結構比較復雜的工業件可以采用尼龍材料3D打印。

　　3D printing is a new processing technology. Due to the good physical and mechanical properties of 3D printing nylon material, it is suitable for functional handboards and terminal products of some industries, especially for some industrial parts with complex structure, 3D printing of nylon material can be used.

　　3D打印尼龍材料手板不需要加支撐，所以適合做比較復雜的結構，而且材料強度高，韌性好，打印速度快，適合小批量生產手板。

　　3D printing nylon material hand board does not need to be supported, so it is suitable for complex structure, and the material has high strength, good toughness, fast printing speed, suitable for small batch production of hand board.

　　小批量手板加工成本便宜，生產制造周期時間較短，小批量生產一般就是指幾十到上百個的數量，這些數量的手板模型假如選用CNC生產加工得話，所消耗的成本和時間是非常多的，而3d打印盡管效率會很高。

　　The cost of small batch handboards is cheap and the manufacturing cycle time is short. Small batch production generally refers to tens to hundreds of quantities. If the handboard models of these quantities are produced and processed by CNC, the cost and time consumed are very much, while 3D printing will be very efficient.

　　以上是關于小批量塑膠手板加工的方法，由濟南手板整理提供，想要了解更多歡迎咨詢http://www.111jsy.cn網站。

　　The above is about the processing method of small batch of plastic handboards, which is provided by Jinan handboard finishing. If you want to know more, please contact us http://www.111jsy.cn Website.