在手板模型行業之中，會常常聽見高光這一個詞，這都是歸屬于手板模型的一個表層的工藝處理，能夠讓手板模型的表層變得越來越亮。無論是選用一些塑料手板模型，還是一些金屬手板模型，全是可以做高光效果的，下面就來說一說濟南手板模型制作的高光處理問題。

In the prototype industry, you will often hear the word "highlight", which is a surface treatment of the prototype, and can make the surface of the prototype become brighter and brighter. No matter some plastic hand models or some metal hand models are selected, they can all be used for highlight effect. Now let's talk about the highlight processing of Jinan hand models.

目前，在對手板模型進行生產的時候，為了確保質量，基本上都會在模型上面采用各類砂紙進行打磨處理。經常打磨可以讓手板模型加工了以后又更高的亮度，并且整個加工工作所付出的精力也沒有非常大。

At present, in order to ensure the quality, when the prototype is produced, basically all kinds of sandpaper are used to polish the model. Frequent polishing can make the prototype brighter after processing, and the whole processing work does not pay much attention.

比如說在我們的日常工作中，碰到一些手板模型，用戶希望能夠達到表面高光的效果，這就給后續的操作處理提出了很高的要求，只有那些經驗非常豐富的加工師傅才能保質保量地完成這個任務。在如今的快速成型產業，為了有效地提升手板模型的質量，通常會對產品表面進行比較少三種以上的砂紙打磨處理，因為打磨詞素越多，產生的亮度也就越高，不過工作量也是非常大的。

For example, in our daily work, when we encounter some prototype models, the user hopes to achieve the effect of surface highlights, which puts forward high requirements for subsequent operations. Only those experienced processors can complete this task with quality and quantity guaranteed. In today's rapid prototyping industry, in order to effectively improve the quality of the prototype model, more than three sandpaper sanding treatments are usually carried out on the product surface, because the more morphemes sanded, the higher the brightness is, but the workload is also very large.

手板模型的高光效果在得到提升了以后，經常會通過噴漆的形式進行處理，而且次數會基本上都是控制在3~4次左右。在噴漆處理了以后，就會把它拿到無塵車間當中去采取UV處理，通過一系列的處理工作以后，手板模型的高光效果就非常理想了。

After the highlight effect of the prototype is improved, it is often treated by painting, and the number of times is basically controlled at about 3-4. After painting, they will take it to the dust-free workshop for UV treatment. After a series of treatment, the highlight effect of the prototype is very ideal.

除此之外，手板模型在噴漆處理的時候，還要檢查它是不是存在著缺陷，打磨過程須要有良好的耐心才可以提升高光效果。

In addition, when painting the prototype, check whether it has defects. The polishing process requires good patience to improve the highlight effect.

上述所講解的就是手板高光效果工藝，希望看完能夠對您有所幫助，如果您想要了解更多關于手板的相關信息的話，歡迎在線咨詢客服http://www.111jsy.cn，我們將竭誠為您提供貼心的服務！

The above is about the highlight effect process of the prototype. I hope it will help you after reading it. If you want to know more about the prototype, please consult the customer service online http://www.111jsy.cn , we will wholeheartedly provide you with considerate service!